ESU 54673 LokSound PowerPack MiniXS Capacitor

ESU 54673 LokSound PowerPack MiniXS Capacitor

ESU Item #: 54673

Overview:

The ESU PowerPack MiniXS can be wired to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic). It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders.

With its energy storage (6 x 0.22 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound system. Subject to the energy consumption of your model it may continue to move for up to 1.5 seconds. This extremely flat module is intended for smaller vehicles with moderate power consumption.

The PowerPack MiniXS is equipped with a microcontroller and incorporates an charging circuit controlled by the decoder. Therefore it may be connected even during programming. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). The output voltage is adjusted fully automatically to the track voltage by the microcontroller in order to avoid flickering of the lighting when buffering is activated.

The space requirements of the PowerPack MiniXS of about 25.5 mm x 4.5 mm x 13.5 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack MiniXS to the decoder.

*Please note that due to technical reasons the PowerPack cannot operate in analogue mode: Buffering is therefore not possible in analogue mode.

Shipping

Most in-stock orders ship within 2–3 business days. We normally ship via USPS with tracking and insurance. UPS is available on request (add a note at checkout). Shipping charges are based on the items ordered, package size and weight, destination and shipping method. We ship worldwide.

Pre-orders

We don’t charge your card when you place a pre-order. Your card is charged only when the item is available and your order is being prepared for shipment.

Returns

When you buy from Tony’s you buy with confidence. If you don’t like it, send it back for a refund or exchange (subject to a restocking charge at our discretion). New locomotive warranty issues are handled through the manufacturer. Read the full policy.